Article 1
These Regulations are established in accordance with Paragraph 2 of Article 14 of the Commodity Inspection Act.

Article 2
The terms used by these Regulations are defined as follows:
1.Certification body: It means that the Bureau of Standards, Metrology and Inspection of the Ministry of Economic
Affairs (hereinafter referred to as the “BSMI”) or his branches, or the other government agency, the juristic
person or organization commissioned by BSMI.
2.Product Certification: It means that the products are certified with conformity assessments impartially and
independently so as to ensure the products made by manufacturers are in compliance with the specified standards
and testing items.

Article 3
An applicant for voluntary product certification(hereinafter referred to as “VPC”) shall be either the
manufacturer of the commodities or a person who entrusts others to manufacture the commodities (hereinafter
referred to as the “manufacturer”). However, the client shall not be an applicant for the specified commodities
announced by the BSMI per public notice. Where the manufacturer is located outside the territory of the Republic
of China, the applicant shall be the sales agent or importer who has its domicile or business place in the Republic
of China.

Article 4
The modules of conformity assessment procedures for VPC are as follows:
1.Product Testing Module: The applicant or the production premises shall submit technical documents together with
the necessary samples required for testing and obtain a type-test report indicating that the types are incompliance
with specified standards or testing items from the BSMI or the designated testing laboratories recognized by the
BSMI. For testing items which could not be carried out domestically, the applicant may file an application to the
BSMI and acquires approval for testing at foreign testing facilities.
2.Declaration of Conformity-to-type Module: The applicant shall draft a declaration of conformity-to-type and ensure
the manufactured commodities are in conformity with those in the type-test report.
3.Factory Inspection Module: The production premise is required to obtain a factory inspection report issued by the
BSMI, or the factory inspection body recognized by the BSMI. A declaration of conformity-to-type is also required to
ensure the manufactured commodities are in conformity with those in the type-test report.
4.Full Quality Management System Module: The production premise is required to establish a quality management system
that encompasses design, development,production, installation and servicing, and to obtain a registration certificate
from the BSMI or some certification body recognized by the BSMI, in accordance with the CNS 12681 (ISO 9001). A
declaration of conformity-to-type is also required to ensure the manufactured commodities are in conformity with
those in the type-test report.
5.Production Quality Management Module: The production premise is required to establish a quality management system
that encompasses production, installation and servicing, and to obtain a registration certificate from the BSMI, or
some certification body recognized by the BSMI, in accordance with the CNS 12681 (ISO 9001). A declaration of
conformity-to-type is also required to ensure the manufactured commodities are in conformity with those in the
type-test report.
The Regulations Governing Recognition of Designated Testing Laboratory for Commodity Inspection shall apply mutatis
mutandis to the regulations governing the qualification requirements, conditions, application procedures and
assessment, the term of validity of recognition, the issuance or replacement/revocation/rescission of the certificate,
and relevant administrative matters of the designated laboratory of Subsection 1 of Paragraph 1 of this Article.
The applicable products, standards, testing items, and modules of conformity assessment procedure for VPC shall be
designated and made known to the public by the BSMI.

Article 5
The applicant of VPC shall submit an application form and the photocopies of the following documents to the
certification body：
1.A copy of the registration document of the company, business, factory, other equivalent incorporation documents
or identity document of the applicant unless the status of the applicant has been registered with the certification
bodies and remains unchanged;
2.The declaration document, product testing report, factory inspection report, quality management system registration
certificate as required by specified conformity assessment modules or other documents designated by the BSMI to
substitute for conformity assessment related documents;
3.Other technical documents designated by the BSMI.
An applicant shall provide a signed declaration stating that the copies of the documents mentioned above are identical
to the originals or current situation. If necessary, the certification bodies may require the applicant to present the
original documents for verification.
Where the product certificate is revoked, or is rescinded in accordance with Subsection 3, 6 or 11 of Article 21, the
original type-test report shall not be submitted as conformity assessment documents mentioned in the Subsection 2 of
Paragraph 1 of this Article.

Article 6
If the documents submitted as required by the preceding Article are incomplete or insufficient, the applicant shall
render supplement or amendment of the relevant documents within two months after the date of receipt of the notice
issued by the certification body. If the applicant fails to render supplement or amendment of the relevant documents
by the expiration of the preceding period, or the supplement or amendment still does not meet the requirements, the
application shall be rejected accordingly.

Article 7
A VPC certificate shall be issued to the applicant after the application has been reviewed and approved, and the
applicant will be permitted to use the certification mark. Where the application doesn’t meet the requirements, the
certification body shall offer reasons and reject this application case.
The terms of validity of VPC certificates may vary depending on the categories of commodities, and shall be determined
and made known to the public by BSMI per public notice.
About the review mentioned in Paragraph 1 of this Article, the certification body may request samples to be provided
by the applicant, if necessary, for performing testing of specified test items.
If the same applicant’s product is manufactured by several production premises, those premises complying with applicable
conformity assessment procedures may be registered on the same product certificate.

Article 8
An applicant shall not re-apply for registration of product certification for the same type of commodity except when
an applicant makes a new application for registration of product certification for the same registered type within a
period of three months prior to expiry of the certificate.
The registered type of commodity shall be designated in accordance with the commodity model. Specifications, other
characters or codes shall be designated as the registered type when the commodity has no model.
The model, specifications, and characters stipulated in the preceding paragraph shall be unique for identification
purposes, and shall be designated by the applicant when the application is filed.

Article 9
A certificate holder may apply for extension of the term of validity by providing relevant documents within a period
of three months prior to the expiration of the certificate. This extension is limited to one time only. For
applications that are made after the expiration of the certificate, a new application for product certification shall
be required.
A replaced certificate will be issued after the application for extension of the term of validity mentioned in the
preceding paragraph is reviewed and approved.
The extended term of validity of a registration certificate shall be determined according to that announced in
Paragraph 2 of Article 7 of the Act, beginning from the day following the expiry date of the original certificate.
Articles 5 to 7 shall apply mutatis mutandis to the application and review stipulated in the first paragraph of
this Article.

Article 10
The VPC mark comprises a graphic symbol with an identification number close to it.
The above-mentioned graphic symbol and identification number shall be assigned while a certificate is issued by
the certification body.

Article 11
While using the VPC mark, the graphic symbol and identification number stipulated in the preceding Article shall be
affixed, in a way that is not easily worn away, in a prominent place on a commodity. However, if the commodity is
too small to be affixed, the mark can be attached to the packaging or the container of the commodity after getting
the approval from the BSMI in advance.
If the preceding Paragraph is not obeyed, the certification body shall give notice of requiring the applicant to do
necessary correction in a given time limit. The deadline for correction shall not exceed one month unless permission
is granted just once for another one more month.

Article 12
The certification body may conduct a non-routine factory inspection to the production premises of the certified
commodity to which the Factory Inspection Module is applicable. The factory inspection shall be undertaken at least
once a year and the result shall be transformed into the factory inspection report, which will be delivered to the
certificate holder.
After the factory inspection stipulated by the preceding Paragraph but the result fails to comply with the relevant
regulations, the certification body shall give notice of requiring the applicant to do necessary correction in a
given time limit. The deadline for correction shall not exceed three months and the certification body shall conduct
an inspection again while the deadline expires. From the beginning of the correction period to the date of
re-inspection of proving the operation of the production premise is in compliance with relevant regulations, the
applicant is not allowed to affix the certification mark on the related products.

Article 13
The certification body may conduct non-routine product testing toward samples purchased from market or those sampled
from the certificate holder or production premise.
Where the certificate holder doesn’t agree with the preceding testing result, the certificate holder may apply for
a re-inspection at no cost within fifteen days after receiving the said result. The re-inspection shall be conducted
on the original samples. If there are no original samples remaining, or if the re-inspection cannot be conducted on
the original samples, further sampling may be performed.

Article 14
In accordance with the preceding two Articles, the certification body may send a staff member to the production
premises, business places or other relevant sites to conduct a factory inspection or product sampling for testing, and
the certificate holder shall submit relevant documents upon request.
The certificate holder or production premise shall not evade, impede or refuse the inspection, testing or requirements
stipulated by the preceding Paragraph without justifiable reason.

Article 15
Where the inspection standards of commodities that have been granted registration of product certification are revised,
for purposes of safety, health, environmental protection, efficiency of resource utilization or other public interests,
the certification body may notify the certificate holder to apply for replacing the certificate to conform to the
revised standards within a given time limit.

Article 16
If any changes are made to commodities that have been certified, the certificate holder shall take actions according
to the following procedures:
1.Where the basic design has been changed, a new application for product certification shall be submitted;
2.Where the basic design remains the same but the testing items of a serial commodity have been changed, an application
shall be submitted for product certification of this serial commodity. The certificate holder shall return the original
certificate and re-apply for a new certificate.
3.Where the basic design remains the same and the changes mentioned in the previous paragraph do not affect the
registered items of certificate and commodity identification, an application for such changes shall be submitted to the
certification body for permission.
Where the application is submitted in accordance with the Subsection 2 of the this Article, the original certificate
shall be returned so as to apply for a new certificate.

Article 17
For commodities granted certification, an application for any increase, change, or relocation of the production premise
shall be submitted to the certification body for approval. Where the production premises are listed on the certificate,
an application for replacing the certificate shall be required.

Article 18
If any changes occur to the items specified in the product certificate, the certificate holder shall submit the original
certificate and relevant documents to the certification body within one month with a view to applying for a replacement
of the original certificate.

Article 19
An application for a re-issuance or replacement of the original product certificate may be made if the original product
certificate is lost or damaged.

Article 20
Where the product certificate was acquired by fraudulent means, the certification body shall revoke it, and give notice
of requiring the certificate holder to return it in a given time limit. The certification body shall proactively announce
to rescind it if the deadline expires.

Article 21
The certificate body shall rescind the product certificate and shall require the certificate holder to return the
certificate if any of the following situations occurs:
1.Where the correction on certification mark is not accomplished as required in Paragraph 2 of Article 11 within a given
time limit.
2.Where the certificate holder hasn’t accomplished correction as required in Paragraph 2 of Article 12 within a given
time limit, or the products manufactured during the beginning of the correction period to the date of re-inspection of
proving the operation of the production premise is in compliance with relevant regulations are still affixed with
certification mark.
3.Where the commodities purchased or sampled, according to Article 13, are inspected and found not to be in conformity
with the certification standards or still can not meet the requirements after re-inspection.
4.Having violated the provision of Paragraph 2 of Article 14 concerning evading, impeding or refusing the inspection.
5.Where the commodity has failed to conform to the amended or revised certification standards for replacing the
certificate within a given time limit as required by the certification body according to Article 15.
6.Where the certificate holder hasn’t applied to the certification body for approval in accordance with Article 17.
7.Where the certificate holder hasn’t applied for replacement of the original certificate in accordance with Articles
18 within a given time limit, even after certificate holder has been noticed to do so.
8.Where the certificate holder hasn’t paid the certification fee, even after the certificate holder has been noticed
to do so within the given time limit.
9.Where the product certificate is used beyond the scope that the product certificate is granted.
10.Where a defect of the commodity has caused severe injury to any person or the hazard to public safety.
11.Where the certificate holder applies for rescission of the product certificate or where the commodity subject to
product certification has been rescinded by a public notice.
12.Where the registration document of the company, business, factory, other equivalent incorporation registration
documents or identity document has been revoked, rescinded or deregistered by the responsible government agency.
13.Where the company has been disincorporated or closed.

Article 22
The certification marks shall not be affixed on the products from the next day of product certificate is revoked or
rescinded in accordance with preceding two Articles.However, the products produced before the rescission which
rescinded according to Subsection 11 to Subsection 13 of the preceding Article may continue to be affixed with product
certification mark for 6 months dated from the next day of the rescission order is issued.
For those products certification has been revoked or rescinded in accordance with Article 20 or Subsection 3, 10 of
the preceding Article, the certificate holder and the production premise shall remove the certification marks on the
products leaving the factory, the certified products remained in the factory both which produced before rescission
order is issued, and its packaging and container in 2 months dated from the next day of the rescission order is issued.
For those products certification has been revoked or rescinded in accordance with Subsection 1, 2 or Subsection 4 to
Subsection 9 of the preceding Article, the certificate holder and the production premise shall remove the certification
marks on the certified products remained in the factory which produced before rescission order is issued, and its
packaging and container in 2 months dated from the next day of the rescission order is issued.
Where the product certification has been revoked or rescinded in accordance with Article 20 or Subsection 1 to
Subsection 10 of the preceding Article, the original certificate holder will be forbidden to apply for VPC certification
with same product in 6 months, unless otherwise approved by the certification body under special situations.

Article 23
These Regulations shall take effect upon the date of promulgation.