Article 1
These Regulations are enacted pursuant to Paragraph Four, Article 34 of the Weights and Measures
Act (hereinafter referred to as "the Act").

Article 2
"Measuring instrument enterprises" mentioned in these Regulations refers to the enterprises engaged
in the manufacturing, repair, or importation of legal measuring instrument in accordance with
Paragraph One, Article 34 of the Act.

Article 3
To apply for business operation of licensing of measuring instrument enterprise, an application
form for establishment of business operation of licensing of measuring instrument enterprise and
a statement shall be prepared and submitted together with the photocopy of the principal's ID
card to the dedicated weights and measures authority. If it is confirmed through examination
that the application meets relevant provisions, a business operation establishment licensing
document of measuring instrument enterprise shall be issued.
The applicant may apply for a business license only after having finished the registration of
company or commercial weights and measures business operation items with the establishment licensing
document presented. However, if the measuring instrument manufacturer is a factory as called in the
Factory Management and Guidance Act, the manufacturer may apply for a business license only after
having finished the factory registration in addition to the aforesaid registration items.

Article 4
To apply for a business license, the applicant shall prepare an application form, and submit
it together with the permit fee and license fee as well as the following documents in addition
to the photocopy of company or firm registration to the dedicated weights and measures authority:
1.Manufacturer:
(1)A photocopy of factory registration; where the manufacturer is exempted from factory registration,
it shall be exempted from submission of the documents related to factory registration.
(2)A photocopy of reports for calibration of the measurement standards.
2.Repairer: a photocopy of reports for calibration of the measurement standards.
"Reports for calibration" mentioned in the preceding Paragraph refers to the records of calibration
conducted in accordance with Article 38 of the Act.
For repairers designated by the dedicated weights and measures authority, the seal pattern shall be
submitted as well.
If the relevant requirements are not satisfied in Paragraphs 1 and preceding Paragraph, a time limit
may be set for correction; in case correction is not made within the specified time limit or the
equipments are deemed as incompliant, the application shall be rejected.
The correction referred to in the preceding Paragraph shall be finished by the applicant within
fourteen days; where necessary, this term may be prolonged by the dedicated weights and measures authority.

Article 5
After having received and qualified in writing an application for business license of measuring
instrument manufacturer or repairer, the dedicated weights and measures authority shall inspect the
measurement standards and on-site operation of the applicant.
When the dedicated weights and measures authority carries out the on-site inspection, the applicant
shall have articles, measurement standards, related equipment and its operating instructions ready.
If the relevant requirements for the on-site inspection are not satisfied, the correction shall be
finished by the applicant within fourteen days for the re-inspection of the dedicated weights and
measures authority; in case correction is not made within the specified time limit or the re-inspection
is deemed to be incompliant, the application shall be rejected.

Article 6
If it is confirmed after examination that an application for business license meets the relevant
provisions, the dedicated weights and measures authority shall issue a business license.

Article 7
An enterprise that holds a business license of measuring instrument manufacturer may concurrently
conduct the repair of measuring instrument within the scope of manufacturing.
An enterprise that holds a business license of measuring instrument manufacturer or repairer and
is registered at the Bureau of Foreign Trade, Ministry of Economic Affairs as an import & export
company may concurrently conduct the importation of measuring instrument.

Article 8
To establish a branch, a manufacturer, repairer, or importer of measuring instrument which actual
operates business shall apply for a business license separately for the branch or business in
accordance with Article 4; the validity period and the category of business shall be the same as
those of the original business license of measuring instrument.
Where the category of business applied for under the preceding Paragraph is different from that
of the original, application for licensing shall be filed in accordance with Article 3.
Where a manufacturer of measuring instrument establishes factories in different places which
actual operate business, it shall apply for business licenses separately in accordance
with Article 4.

Article 9
A measuring instrument enterprise may, six months before expiration of the validity period of
business license, prepare an application form in accordance with Article 4 and submit it together
with the permit fee and license fee to the dedicated weights and measures authority to apply
for prolongation, and the dedicated weights and measures authority may carry out the on-site
inspection. A measuring instrument enterprise shall reapply a business license which validity
period expires, and the prolonged application shall be rejected in accordance with Article 4.
The validity period of the qualified replacement license referred to in the preceding Paragraph
is ten years commencing from the day following expiration of the validity period of the original
business license. However, if an application for prolongation is not filed six months before
expiration and the replacement is not finished within the validity period of the original business
license due to causes not attributed to the dedicated weights and measures authority, or if an
application for prolongation is filed eight months before expiration, the validity period of the
replacement shall be ten years commencing from the day of issuance.
If the relevant requirements are not satisfied in the preceding Paragraph, a time limit may be
set for correction. The correction referred to in the preceding Paragraph shall be finished
within fourteen days; in case correction is not made within the specified time limit, the
application shall be rejected.

Article 10
In case of alteration of items in the business license, a measuring instrument enterprise shall
prepare an application form, pay the license fee, and submit the application form together
with the original business license and a photocopy of the company or firm registration
certificate to the dedicated weights and measures authority, to apply for replacement of the
business license. The dedicated weights and measures authority may carry out the on-site
inspection whenever necessary; if the enterprise is a manufacturer, a photocopy of the factory
registration certificate or relevant certificates on exemption from factory registration shall
be submitted in addition.
In case of alteration of the category class of business of the measuring instrument enterprise,
the provisions of Article 3 shall apply.
In case of addition of the categories of measuring instruments of the measuring instrument
enterprise, the provisions of Article 4 shall apply.

Article 11
In case of loss or damage of a business license, the measuring instrument enterprise may prepare
an application form and submit it together with the license fee to the dedicated weights and
measures authority, to apply for re-issuance or replacement.
A new license as re-issued or replaced under the preceding Paragraph shall use the original
business license No., and mark the date of re-issuance or replacement and the text of "Re-issued"
or "Replaced".

Article 12
Where an application for business license is rejected or withdrawn, the license fee shall be
handed back.

Article 13
(Delete)

Article 14
Businesses obtaining the business license of measuring instrument repairer with the scope of
service covering legal measuring instruments shall repair or align the measuring instruments
in accordance with the technical documents provided by the manufacturers or importers and the
technical specifications of licensed measuring instruments.

Article 15
Businesses obtaining the business license of measuring instrument manufacturer or repairer with
taximeters shall retain the records of repair, including trademark, model, serial number,
license plates, summary of repair, and the name of the component replaced.
The records of repair referred to in the preceding Paragraph shall be kept for the last two
years or more within the validity period of business license for the review of the dedicated
weights and measures authority. If the records are not kept, a time limit may be set for
correction.

Article 16
These Regulations shall come into force as of the date of promulgation.