您的瀏覽器不支援JavaScript功能,若網頁功能無法正常使用時,請開啟瀏覽器JavaScript狀態
跳到主要內容區塊
:::

英譯法規內容

法規名稱(Title) Fee-charging Standards for Measuring Instruments Ch
公發布日(Date) 2018.06.22
法規沿革(Legislative) Amended and promulgated by Ministerial Order on 20 January 1999.
Table 1 referred to in Article 13 amended and promulgated by Ministerial
Order on 1 September 1999.
Table 2 referred to in Article 5 amended and promulgated, and Articles 14-1,
14-2 and 14-3 added by Ministerial Order on 12 January 2000.
Articles 3-1 and 3-2 added and promulgated by Ministerial Order on 11
October 2000.
Table 2 referred to in Article 5 amended and promulgated, and Articles 14-4,
14-5 and 14-6 added by Ministerial Order on 26 December 2001.
33 Articles amended and promulgated in full by Ministerial Order on
8 October 2003.
Rename of the title, Articles 1, 2, 3, 19 and 33 amended; and Articles
29-1, 32-1, and Table 11 referred to in 32-2 added by Ministerial Order
on 28 January 2004.
Table 1 and Table 9 amended and promulgated by Ministerial Order on
2 May 2005.
Table 1,Table 6, Table 9 and Table 10 amended and promulgated by
Ministerial Order on 3 July 2006.
Articles 10, 24, 26 and Table 9 referred to in Article 28 amended and
promulgated , and Articles 22-1 added by Ministerial Order on 29 December
2006.
Articles 4, 7, 9, 21 , Table 9 and Table 10 amended and promulgated by
Ministerial Order on 29 June 2007.
Table 9 referred to in Article 28 amended and promulgated by Ministerial
Order on 14 February 2008.
Table 9 referred to in Article 28 amended and promulgated by Ministerial
Order on 22 January 2009.
Articles 22, 24 and Table 1 referred to in Article 6, Table 6 referred to in
Article 14, Table 8 referred to in Article 23, Table 9 referred to in Article
28 amended and promulgated , and Article 22-2 added by Ministerial Order
on 11 March 2010.
Articles 17 and Table 1 referred to in Article 6, Table 9 referred to in Article
28 amended and promulgated by Ministerial Order on 15 June 2010.
Articles30, 32-3 and Table 9 referred to in Article 28 amended and promulgated
by Ministerial Order on 25 April 2011.
Table 9 referred to in Article 28 amended and promulgated by Ministerial Order
on 3 February 2012.
Articles 3, 5,33 and Table 9 referred to in Article 28 amended and promulgated,
and Article 32-4 and Table 12 referred to in 32-4 added by Ministerial Order on
25 April 2013.
Table 9 referred to in Article 28 amended and promulgated by Ministerial Order
on 10 January 2014
Articles 17 and Table 9 referred to in Article 28, Table 12 referred to in Article
32-4 amended and promulgated by Ministerial Order on 27 December 2014.
Articles 16, 19 and Table 6, 7 referred to in Article 14, Table 9 referred to in
Article 28, Table 12 referred to in Article 32-4 amended and promulgated, and
Articles 18-1, 26-1 added by Ministerial Order on 15 February 2016.
Articles 4 and Table 9 referred to in Article 28, Table 12 referred to in Article
32-4 amended and promulgated by Ministerial Order on 28 April 2017.
Table 3 referred to in Article 9, Table 5 referred to in Article 11 and Table 9
referred to in Article 28 amended and promulgated by Ministerial Order on
22 June 2018.
法規內文(Content)

Chapter I  General Principles

Article       1

These Regulations are established in accordance with Article 59 of the Weights and Measures Act

(hereinafter referred to as "the Act") and Article 7 of the Statutory Fees Act.

 

Article       2

The verification body as referred to in these Regulations shall mean the dedicated weights and

measures authority, its braches, or any other government agencies (institutions) or organizations

commissioned by the dedicated weights and measures authority.

 

Article       3

The fees for weights and measuring instruments as referred to in these Regulations shall mean the

following:

1. Verification fee;

2. Appraisal fee;

3. Type approval fee;

4. Assessment fee;

5. Calibration fee;

6. Certificate and License fee;

7. Permit fee;

8. Registration fee; and

9. Calibration fee for weights.

10. Certification Fee

Fees shall be collected in New Taiwan Dollars. The total sum shall be rounded-up to the closest

dollar value.

 

Chapter II   Verification Fee

Article       4

An NTD 500 on-site verification fee for each person each time shall be collected by the verification

agency (institution) for dispatching its personnel to conduct verification at the site of storage place

of measuring instruments in accordance with Article 8 of the Regulations Governing Verification

and Inspection of Measuring Instruments, except that the verification agency (institution) dispatch

its personnel to perform the official business at the site of storage or installation place of measuring

instruments where they receive an application for verification then and complete the verification

within the same day.

If the personnel performing the official business as referred to in the preceding paragraph cannot

commute to the place of verification and back within the same day or has to commute between

different branches, the on-site fees shall be collected in accordance with the costs and expenses set

forth in the Directions Governing Domestic Business Travel Expenses.

 

Article       5

The verification fee for taximeters shall be NTD 35 per set of stationed taximeters and NTD 200 for

simulated-road verification and road verification per set.

In item (1), the verification fee for simulated-road verification and road verification shall come into

force on 1 July 2013.

 

Article       6

The verification fees for weighing instrument are shown in Annex 1.

 

Article       7

The verification fee for non invasive automated sphygmomanometers is NTD 15 per set.

 

Article       8

The verification fees for metal graduated measuring pails and tanks are shown in Annex 2.

 

Article       9

The verification fees for diaphragm gas meters are shown in Annex 3. If the applicant requests for

verification conducted with its own verification equipment and the verification is conducted one by

one by the dedicated weights and measures authority or its branches, the verification fee shall be

charged in the amount of two-fifths of the total verification fee payable for the declared quantity of

measuring instruments under application.

 

 

Article       10

The verification fees for water meters are shown in Annex 4. If the applicant requests for

verification conducted with its own verification equipment and the verification is conducted one by

one by the dedicated weights and measures authority or its branches, the verification fee shall be

charged in the amount of two-fifths of the total verification fee payable for the declared quantity of

measuring instruments under application.

 

Article       11

The verification fees for oil meters are shown in Annex 5.

 

Article       12

The verification fee for liquefied petroleum gas flow meters is NTD 2,000 per set.

Article       13

The verification fee for milk hydrometers is NTD 8 per set.

 

Article  14

The verification fees for electricity meters are shown in Annex 6, and the verification fees for

transformers matched with electricity meters are shown in Annex 7.

 

Article       15

The verification fee for radar speedometers is NTD 5,000 per set.

 

Article       16

The verification fee for sound level meters is NTD 7,900 per set and Octave-band filters is NTD

3,200 per set which enter into force on January 1, 2017.

The verification fee for sound level meters passed verification prior to the December 31, 2016, is

NTD 4,800 per set.

 

Article       17

The verification fee for breath alcohol testers is NTD 11,500 per set for new testers, or NTD 8,200

per set for tester in-use; the verification fee for evidential breath alcohol analyzers is NTD 12,700

per set for new analyzers, or NTD 11,200 per set for analyzers in-use.

The verification fee mentioned in the preceding Paragraph enters into force on January 1, 2015.

By December 31, 2017, the verification fee for breath analyzers passed for initial verification prior

to the December 31, 2014, is NTD 9,400 per set.

 

Article       18

The verification fee for rice grain moisture meters is NTD 2,400 per set.

 

Article 18-1

The verification fee for corn moisture meters is NTD 3,400 per set.

 

Article       19

The verification fee for vehicle exhaust emissions analyzers is NTD 7,000 per set for new

analyzers, or NTD 5,050 per set for analyzers in-use.

 

Article       20

The verification fee for illuminance meters is NTD 3,700 per set for new meters, or NTD 3,300 per

set for in-use meters.

                                                           

Article       21

The verification fee for thermometers is NTD 2 per set.

 

Article       22

For verification conducted by an organization on its own, the verification fee shall be charged in the

amount of one-fifth of the total verification fee payable for the quantity of measuring instruments

under application.                                                                                                                                                                                                                                                            

Article  22-1

The verification fee for Laser speedometers is NTD 4,500 per set.

 

Article  22-2

The verification fee for inductive loop speedometers is described as follows:

1. The verification fee for the controller cabinet of inductive loop speedometers is NTD 4,200

per set for new speedometers, or NTD 3,200 per set for speedometers in-use.

2. The base verification fee for the inductive loop of inductive loop speedometers is NTD

6,700; one lane at each site. For each additional lane at the same place of verification,

additional NTD 500 shall be charged.

 

Chapter III   Appraisal Fee

Article       23

The appraisal fees for water meters are shown in Annex 8.

 

Article       24

The appraisal fee for electricity meters is described as follows:

1. Watt-hour meters and static electricity meters exclusively functioning watt-hour measurement:

NTD 1,800 per set;

2. Var-hour meters and static electricity meters exclusively functioning var-hour measurement:

NTD 1,800 per set;

3. Watt-hour demand meters and static electricity meters exclusively functioning watt-hour

demand measurement: NTD 2,300 per set; and

4. Transformer matched with electricity meters: NTD 3,200 per set.

 

 

Article       25

The appraisal fee for diaphragm gas meters is NTD 1,300 per set.

 

Chapter IV   Type Approval Fee and Assessment Fee

Article       26

The type approval fee for measuring instruments is NTD 5,000 per set.

The series type approval fee for measuring instruments is NTD 3,000 per set.

 

Article       26-1

The extension of the validity of type approval or series type approval fee for measuring instruments

is NTD 5,000 per set.

 

Article       27

For measuring instrument laboratories that apply for becoming designated laboratories, the

assessment fee shall be charged on the basis of NTD 8,000 per man-day; the same shall apply for

re-assessment.

An assessment fee of NTD 4,000 shall be charged for assessments conducted in less than four (4)

hours.

An assessment fee of NTD 2,000 shall be charged for assessments conducted to applications made

in accordance with Article 16 of the Regulations Governing the Recognition of the Designated

Testing Laboratory for Measuring Instruments.

 

Chapter V   Calibration Fee

Article       28

The calibration fees for measuring instrument by national measurement laboratories are shown in

Annex 9. The calibration fee shall be doubled for cases that the applicant requests for urgent

processing.

 

Article       29

The calibration fees for measuring instrument conducted by the dedicated weights and measures

authority and its branches are shown in Annex 10. An additional fee of NTD 450 shall be charged

for every application case, except for pressure gauges, vernier calipers and micrometers.

 

Article       29-1

An on-site calibration fee of NTD 500 per person-time shall be charged for calibration conducted

by personnel dispatched by the dedicated weights and measures authority or its branches at the

storage place of measuring instruments. If the person cannot commute to the place of calibration

and back within the same day, the calibration fees shall be collected in accordance with the costs

and expenses set forth in the Directions Governing Domestic Business Travel Expenses.

 

Chapter VI   Other Fees

Article       30

Except the certificate fee of NTD 500 for metrological technical personnel certificates, certificate

and license fees for certificates or licenses issued in accordance with provisions of the Act shall be

NTD 1,000. The same shall apply for issuing replacement or renewed certificates or licenses.

 

Article       31

A permit fee of NTD 2,000 shall be charged to an organization that is allowed to carry out self-

verification.

 

Article       32

The permit fees for weights and measures organizations is described as follows:

1. NTD 2,200 for manufacturing or repairing industry. The same rate shall apply to alteration of

the scope specified in the licenses.

2. NTD 400 for importers.

3. NTD 400 for an extension of licenses.

The above rates shall apply to licenses issued to branches of the organization.

 

Article       32-1

The registration fee for metrological technical personnel is NTD 1,200 per person.

 

Article       32-2

The calibration fees for weights conducted by the dedicated weights and measures authority are

shown in Annex 11.

 

Article       32-3

The re-test fee for prepackaged products is NTD 3,000 for each time.

 

Article       32-4

The certification fee for reference material by national measurement laboratories are shown in

Annex 12.

 

Article       33

These Regulations shall come into force from the date of promulgation except for articles whose

enforcement date has been set separately.

 

圖表附件(Attachments)